In a radical departure from convention, MSOE’s mini-Baja vehicle, top, uses a hydrostatic drive system, above, in lieu of a conventional geared drive train. Photo at right shows close-up of bent-axis hydraulic ...
Apopular hydraulic valve for marine applications is the adjustable flow fuse. The valve is mounted in the hydraulic line leading to the actuator (see red circle below). Under normal operation, the valve allows free flow of the fluid in either di...
SAE’s new J2337 fitting relies on a strategic combination of mating metal surfaces and O-rings to provide leak-tight sealing, yet allows the mounting orientation to be adjusted.
Users of hydraulic systems are demanding cost effective, leak-proo...
The A380, which will seat 555 passengers and travel up to 8000 mi without refueling, is planned to be operational in early 2006. It takes the double-decker concept from rival Boeing's 747, but stretches the upper deck the entire length of the...
Although air compressor operating specifications may look the same on paper, their fundamental designs and controls can make major differences in how they perform.
This is part 6 in a series on the importance of following good safety protocol in fluid power system maintenance and design. It highlights real-life examples of the dangers and injuries that can occur and provides advice on preventing them. Find...
