Hydraulicspneumatics 6073 Specialty Mfg Suction Strainers
Hydraulicspneumatics 6073 Specialty Mfg Suction Strainers
Hydraulicspneumatics 6073 Specialty Mfg Suction Strainers
Hydraulicspneumatics 6073 Specialty Mfg Suction Strainers
Hydraulicspneumatics 6073 Specialty Mfg Suction Strainers

Suction Strainers

Oct. 24, 2019
Suction strainers feature type 304 stainless steel mesh sizes from 4 to 100 with a 1/8- to 3-in. nylon NPT base.

Suction strainers feature type 304 stainless steel mesh sizes from 4 to 100 with a 1/8- to 3-in. nylon NPT base. These strainers are rated for continuous use up to 200°F, and custom mesh sizes are available. They are most commonly used in hydraulic applications but can protect pumps from damage by the ingress of foreign debris in any application involving air or liquid media.

The Specialty Mfg. Co., www.specialtymfg.com/strainers-filters

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...