Hydraulicspneumatics 493 Youngpower Ypgc
Hydraulicspneumatics 493 Youngpower Ypgc
Hydraulicspneumatics 493 Youngpower Ypgc
Hydraulicspneumatics 493 Youngpower Ypgc
Hydraulicspneumatics 493 Youngpower Ypgc

Planetary gear reducers

March 6, 2012
YPGC/YPGC-A planetary drives are made of 60% steel, about 35% cast iron and a lower percentage of aluminum, copper, rubber and brass.
YPGC/YPGC-A planetary drives are made of 60% steel, about 35% cast iron and a lower percentage of aluminum, copper, rubber and brass. YPGC planetary gear units are divided into 21 groups that transmit torque to the output shaft ranging from 350 to 500,000 lb-ft. Modular construction permits coupling of bevel gears, worm gears,
hydraulic brakes and input shafts to planetary units. Modularity allows for choice of coupling flanges for hydraulic or electric motors. Various stages, in different sizes, can be mounted in series to offer reduction ratios from 3:1 to 7:1 on single-stage drives up to 10.000:1 and more on 5-stage drives. The wide selection of output shafts and flanges simplifies the reduction unit mounting operation on industrial machinery or plants.

Young Powertech, (888) 465-3561, www.yptius.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...