Hydraulicspneumatics 796 Automationdgptfetu1
Hydraulicspneumatics 796 Automationdgptfetu1
Hydraulicspneumatics 796 Automationdgptfetu1
Hydraulicspneumatics 796 Automationdgptfetu1
Hydraulicspneumatics 796 Automationdgptfetu1

Pneumatic tubing comes in UV-stabilized polyurethane (PUR) and PTFE materials

Sept. 10, 2013
pneumatic tubing now includes UV-stabilized polyurethane (PUR) and PTFE styles.
NITRA pneumatic tubing now includes UV-stabilized polyurethane (PUR) and PTFE styles.  PUR tubing protects against UV rays and UV lights used in curing processes. It is available in 5/32- to 1/2-in. and 4- to 12-mm sizes in 100- and 500-ft rolls. PTFE tubing has a Shore D 55 hardness resists mechanical degradation under severe conditions, such as washdown and high-pressure compression fittings. It is available in ¼- to ½-in. and 4- to 12-mm sizes in 100-ft rolls.AutomationDirect, 770.889.2858, www.automationdirect.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...