Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 12 01 2009 85075 Highpressu 00000057431

High-pressure sensor

Dec. 10, 2009
Edited By Mary C. Gannon Dual-channel pressure sensor measures pressures to 4000 psia for hydraulic systems in aircraft. Media isolated, oil-filled, piezo-resistive sensing technology allows it to operate in harsh, flight critical ...

Edited By Mary C. Gannon

Dual-channel pressure sensor measures pressures to 4000 psia for hydraulic systems in aircraft. Media isolated, oil-filled, piezo-resistive sensing technology allows it to operate in harsh, flight critical environments with a typical MTBF of 300,000 hr at nominal operating temperatures. Burst pressure is nearly 2X the URL, and the operating temperature is -67º to 257ºF. It operates on supply of 5 to 15 Vdc, and provides a non-amplified 0-100 mV output at 10 Vdc excitation. Accuracy is ±1% of full scale output over an operating temperature range of 0 to 200ºF.

Kavlico - Aerospace, (805) 523-2000, www.kavlico.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...

New

Most Read

Sponsored

5172565 © Tix | Dreamstime.com
Pneumatic system efficiency can be achieved by taking a system-wide approach