1 - 5 of 15
Putting vacuum to work   
Vacuum may be considered negative pressure, but it has more than its share of positive attributes.

Handling vacuum design   
Material handling applications present interesting challenges for vacuum systems.

1
next
1 - 1 of 1
Vacuum    >>
1 - 6 of 22
Vacuum lifter    >>
VPF-57 compact, below-the-hook vacuum lifter handles cylindrical, nonferrous materials, such as billets, pipe, and castings. It features a suction pad with foam seal. ...
 
Digital vacuum gauges    >>
Digital vacuum gauges are portable, troubleshooting devices that accurately verify system vacuum pressures. KF16 fitting connects to system vacuum fittings to measure ...
 
Vacuum pump exhaust filters    >>
Balston vacuum pump exhaust filters remove oil mist and reduce noise from vacuum pumps. They are rated for flows from 3 to 850 cfm and remove heavy concentrations of f...
 
Vacuum cup sealing rings    >>
Air-tight sealing rings can be changed rapidly in the field without disassembling entire system. Rubber sealing ring in 4 to 9 in. diameter sizes snaps into aluminum ...
 
Brass push-in fittings    >>
Push-in fittings are available in 5/32 to 3/4 in. and 4 to 12-mm tube sizes. Solid brass provides strength and reliability to air line connections and forged shapes mi...
 
Composite fittings    >>
LF3000 system makes connections by pushing the tube into fitting. They are available in many designs from 1/8 to 1/2 in. and 3 to 14 mm for vacuum to 290 psi in te...
1 2
next
1 - 10 of 82
AeroControlex Group   Richmond Heights OH, US
Air Logic   Racine WI, US
Airmatic, Inc.   Philadelphia PA, US
Airtec Pneumatics, Inc.   Addison IL, US
Air-Vac Engrg. Co., Inc.   Seymour CT, US
Al Xander Co., Inc.   Corry PA, US
Ametek Rotron   Kent OH, US
Anver Corp.   Hudson MA, US
ASCO Pneumatic Controls   Ft. Mill SC, US
Atlas Copco Compressors LLC   Westfield MA, US

1 2 3
next
Designer's Guide Specification Chart: End Effectors, Airpicker\Airgripper