Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 05 01 2009 84222 Closedloop 00000056517

Closed-Loop Pressure Regulator

May 6, 2009

MM series closed-loop proportional pressure controls have universal mounting capabilities, including DIN rail, panel mount or manifold mounting. MM single closed-loop units deliver pressure control linearly and proportional to dc voltage ...

MM series closed-loop proportional pressure controls have universal mounting capabilities, including DIN rail, panel mount or manifold mounting.

Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 Articles 05 01 2009 84222 Closedloop 00000056517

MM1 single closed-loop units deliver pressure control linearly and proportional to dc voltage or current command input. MM2 dual closed loop units provide secondary feedback as an electrical signal to monitor force, position, flow, etc. Both offer analog output for data acquisition or for display on a panel meter.Proportion-Air, (317) 335-2602www.proportionair.com

Continue Reading

BOOK 2, CHAPTER 12: Fluid Motor Circuits

March 18, 2009

Table of Contents

Motor leakage variations

Oct. 18, 2006

affect low-speed performance

Sponsored Recommendations

All-In-One DC-UPS Power Solutions

March 13, 2024

Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

Motor Disconnect Switches

March 13, 2024

With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

Industrial Straight-Through Cable Gland

March 13, 2024

Learn more about Altech's cable glands and all they have to offer for your needs!

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024

Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...