• Fluid Power Basics
  • Resources
  • Directory
  • Webinars
  • Digital Edition
  • WISE
  • CAD Models
  • Advertise
    1. Sensors & Software
    2. Controls & Instrumentation

    Magnetic inclinometer

    Oct. 18, 2007
    Positilt PTAS2 inclinometer features an IP68-rated stainless-steel housing and is available with three absolute analog outputs: 0.5-5 V, 0.5-10 V and 4-20 mA with a typical resolution of 0.1°. Measurement is available from ±15° to ±180° ...

    Positilt PTAS2 inclinometer features an IP68-rated stainless-steel housing and is available with three absolute analog outputs: 0.5-5 V, 0.5-10 V and 4-20 mA with a typical resolution of 0.1°. Measurement is available from ±15° to ±180° in 15° increments. Compact 1.7-in. diameter housing with servo flange mounting allows for quick and easy installation. Wear-free, multi- Hall Effect position sensor technology increases reliability in extreme environments. It withstands 100 G shock and 20 G, 10 Hz-2 kHz vibration.
    ASM Sensors Inc., (630)-832-3202, www.asmsensors.com
    Circle 159

    Continue Reading

    BOOK 2, CHAPTER 12: Fluid Motor Circuits

    March 18, 2009
    Table of Contents

    Motor leakage variations

    Oct. 18, 2006
    affect low-speed performance

    Sponsored Recommendations

    7 Key Considerations for Selecting a Medical Pump

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

    How Variable Volume Pumps Work

    Feb. 6, 2024
    Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

    What is a Check Valve and How Does it Work?

    Feb. 6, 2024
    Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

    The Difference Between Calibrated Orifices and Holes

    Feb. 6, 2024
    Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...