Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 New Product 18235proportion 00000010272

Proportional air valve manifold

June 5, 2006
Manifold is used with Watson Smith series of VP12 miniature proportional valves and is DIN rail mountable. It easily integrates into the air regulation system and is configurable from the left or right. It is supplied with built-in push-in fittings ...
Manifold is used with Watson Smith series of VP12 miniature proportional valves and is DIN rail mountable. It easily integrates into the air regulation system and is configurable from the left or right. It is supplied with built-in push-in fittings and operates from 4 to 20 mA or 0 to 10 V for pressures to 120 psi.IMI Norgren Inc., (303) 794-2611, www.norgren.com

Continue Reading

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...

How Variable Volume Pumps Work

Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...

What is a Check Valve and How Does it Work?

Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...

The Difference Between Calibrated Orifices and Holes

Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...